Subject term: wastes and angle of repose / Text Availability: Citation in PubAg

Author:: Sanghmitra R. Gade; Murlidhar Meghwal; Pramod K. Prabhakar
Source:: Journal of food process engineering 2020 v.43 no.12 pp. e13545
ISSN:: 0145-8876
Subject:: Benincasa hispida; aluminum; angle of repose; equipment; equipment design; friction; fruits; hardness; models; phytonutrients; prediction; rubber; seed oils; seed size; seed weight; squalene; terminal velocity; terpenoids; therapeutics; wastes; India
Abstract:: ... The correlation of engineering properties and mass of ash gourd seeds was explored by using models like linear, quadratic, S‐curve, power, and multivariate. The recorded range of values for seed groups (group of large mass, medium mass, and small mass) was 92.77 to 34.07 g for thousand seed mass, 28.06 to 24.46 for angle of repose, 5.64 to 4.90 m/s for terminal velocity, 213.73 to 227.12 N/mm for ...
DOI:: 10.1111/jfpe.13545
: https://doi.org/10.1111/jfpe.13545

Author:: Jennifer V. Littlejohns; James Butler; Luis Luque; Kevin Austin
Source:: Waste and biomass valorization 2020 v.11 no.12 pp. 6885-6901
ISSN:: 1877-2641
Subject:: angle of repose; bioenergy; biogasification; biomass; bulk density; combustion; electricity generation; feedstocks; greenhouse gases; internal combustion engines; landfills; oriented strandboards; particulates; producer gas; synthesis gas; temperature; wastes; wood; wood chips
Abstract:: ... Small-scale biomass gasification systems integrated with internal combustion engines can be a solution to the dual challenges of reducing greenhouse gas emissions from electricity production and reducing waste sent to landfills; however, these systems are typically designed for high-value, virgin wood chip feedstocks. This investigation aims to improve the feasibility of this technology by explori ...
DOI:: 10.1007/s12649-020-00940-7
: https://doi.org/10.1007/s12649-020-00940-7

Author:: E. Madadian; A. H. Akbarzadeh; V. Orsat; M. Lefsrud
Source:: Waste and biomass valorization 2019 v.10 no.3 pp. 721-732
ISSN:: 1877-2641
Subject:: angle of repose; biofuels; bulk density; chemical analysis; composite wood products; feedstocks; gasification; image analysis; mechanical properties; modulus of elasticity; pellets; plastics; wastes; water content; wood fibers; wood residues
Abstract:: ... The purpose of this study was to evaluate the physico-chemo-mechanical performance of composite wood residue pellets blended with plastic wastes as potential feedstocks for producing advanced biofuels through gasification technology. The composite pellets of wood fiber and plastics were compressed longitudinally and laterally using a universal testing machine to evaluate their mechanical propertie ...
DOI:: 10.1007/s12649-017-0080-1
: https://doi.org/10.1007/s12649-017-0080-1

Author:: Maraísa L. Menezes; Cissa K. Bracht; Miriam C.B. Ambrosio‐Ugri; Sueli T.D. Barros; Nehemias C. Pereira
Source:: Journal of food process engineering 2014 v.37 no.4 pp. 402-410
ISSN:: 0145-8876
Subject:: angle of repose; bulk density; calcium; drying; feeds; food industry; grape seeds; grapes; magnesium; physicochemical properties; porosity; proximate composition; seed oils; seeds; shrinkage; specific heat; vineyards; wastes
Abstract:: ... This study aimed to analyze physical and chemical characteristics of seeds of Cabernet Sauvignon and Ives grape varieties. Some physical properties were determined: length, width, thickness, true density, bulk density, porosity, sphericity, angle of repose, particle grain size and specific heat of seeds of oven‐dried and fresh seeds. In addition, the proximate analysis and profile of minerals of f ...
DOI:: 10.1111/jfpe.12096
: https://doi.org/10.1111/jfpe.12096

Author:: Samantha C. Dertinger; Nicole Gallup; Nagendra G. Tanikella; Marzio Grasso; Samireh Vahid; Peter J.S. Foot; Joshua M. Pearce
Source:: Resources, conservation, and recycling 2020 v.157 pp. 104810
ISSN:: 0921-3449
Subject:: angle of repose; blades; case studies; circular economy; economic incentives; grinding; injection molding; manufacturing; mechanical properties; particle size; recycling; rheological properties; syringes; thermoplastics; wastes
Abstract:: ... Centralized waste plastic recycling is economically challenging, yet distributed recycling and additive manufacturing (DRAM) provides consumers with direct economic incentives to recycle. This study explores the technical pathways for DRAM of complex polymer composites using a case study of windshield wiper blades. These blades are a thermoplastic composite made up of a soft (flexible) and hard (l ...
DOI:: 10.1016/j.resconrec.2020.104810
: https://doi.org/10.1016/j.resconrec.2020.104810

Author:: O. Tsiundyk; B. Iegorov; A. Lapinska; L. Fihurska
Source:: Harčova nauka ì tehnologìâ 2021 v.15 no.2 pp. -
ISSN:: 2409-7004
Subject:: angle of repose; bulk density; crude fat; crude fiber; crude protein; diet; energy; extrusion; farms; feed additives; livestock; nutritive value; potato peels; potatoes; shelf life; wastes; water content; wheat; Ukraine
Abstract:: ... The paper is concerned with some aspects of processing raw potato peelings. It presents the dynamics of potato production in the world and in Ukraine, and analyses the figures on yields of this crop. Methods of processing potatoes at Ukrainian enterprises have been considered. It has been found that the bulk of the waste (15–60%) is formed during peeling raw potatoes. Methods of utilisation of pot ...
DOI:: 10.15673/fst.v15i2.2028
: https://doi.org/10.15673/fst.v15i2.2028

Main content area