PubAg

Main content area

Selective detection and recovery of gold at tannin-immobilized non-conducting electrode

Author:
Banu, Khaleda, Shimura, Takayoshi, Sadeghi, Saman
Source:
Analytica chimica acta 2015 v.853 pp. 207-213
ISSN:
0003-2670
Subject:
adsorption, analytical chemistry, carbon fibers, chemical reduction, copper, electrochemistry, electrolytes, ferric chloride, fouling, glassy carbon electrode, gold, ions, iron, monitoring, oxidation
Abstract:
A tannin-immobilized glassy carbon electrode (TIGC) was prepared via electrochemical oxidation of the naturally occurring polyphenolic mimosa tannin, which generated a non-conducting polymeric film (NCPF) on the electrode surface. The fouling of the electrode surface by the electropolymerized film was evaluated by monitoring the electrode response of ferricyanide ions as a redox marker. The NCPF was permselective to HAuCl4, and the electrochemical reduction of HAuCl4 to metallic gold at the TIGC electrode was evaluated by recording the reduction current during cyclic voltammetry measurement. In the mixed electrolyte containing HAuCl4 along with FeCl3 and/or CuCl2, the NCPF remained selective toward the electrochemical reduction of HAuCl4 into the metallic state. The chemical reduction of HAuCl4 into metallic gold was also observed when the NCPF was inserted into an acidic gold solution overnight. The adsorption capacity of Au(III) on tannin-immobilized carbon fiber was 29±1.45mgg−1 at 60°C. In the presence of excess Cu(II) and Fe(III), tannin-immobilized NCPF proved to be an excellent candidate for the selective detection and recovery of gold through both electrochemical and chemical processes.
Agid:
5447437