PubAg

Main content area

Process simulation and dynamic control for marine oily wastewater treatment using UV irradiation

Author:
Jing, Liang, Chen, Bing, Zhang, Baiyu, Li, Pu
Source:
Water research 2015 v.81 pp. 101-112
ISSN:
0043-1354
Subject:
algorithms, ballast water, case studies, experimental design, industry, naphthalene, neural networks, oxidation, petroleum, polycyclic aromatic hydrocarbons, process control, reaction mechanisms, salinity, seawater, simulation models, temperature, ultraviolet radiation, wastewater, wastewater treatment
Abstract:
UV irradiation and advanced oxidation processes have been recently regarded as promising solutions in removing polycyclic aromatic hydrocarbons (PAHs) from marine oily wastewater. However, such treatment methods are generally not sufficiently understood in terms of reaction mechanisms, process simulation and process control. These deficiencies can drastically hinder their application in shipping and offshore petroleum industries which produce bilge/ballast water and produced water as the main streams of marine oily wastewater. In this study, the factorial design of experiment was carried out to investigate the degradation mechanism of a typical PAH, namely naphthalene, under UV irradiation in seawater. Based on the experimental results, a three-layer feed-forward artificial neural network simulation model was developed to simulate the treatment process and to forecast the removal performance. A simulation-based dynamic mixed integer nonlinear programming (SDMINP) approach was then proposed to intelligently control the treatment process by integrating the developed simulation model, genetic algorithm and multi-stage programming. The applicability and effectiveness of the developed approach were further tested though a case study. The experimental results showed that the influences of fluence rate and temperature on the removal of naphthalene were greater than those of salinity and initial concentration. The developed simulation model could well predict the UV-induced removal process under varying conditions. The case study suggested that the SDMINP approach, with the aid of the multi-stage control strategy, was able to significantly reduce treatment cost when comparing to the traditional single-stage process optimization. The developed approach and its concept/framework have high potential of applicability in other environmental fields where a treatment process is involved and experimentation and modeling are used for process simulation and control.
Agid:
5452335