%0 Journal Article
%9 Article
%W National Agricultural Library
%~ PubAg
%B Energy
%T Effect of rotor aspect ratio and solidity on a straight-bladed vertical axis wind turbine in three-dimensional analysis by the panel method
%A Li, Qing'an
%A Maeda, Takao
%A Kamada, Yasunari
%A Shimizu, Kento
%A Ogasawara, Tatsuhiko
%A Nakai, Alisa
%A Kasuya, Takuji
%V 2017 v.121
%K aerodynamics
%K equipment performance
%K rotors
%K wind turbines
%M 5612304
%X Due to the complated flow field and aerodynamic forces characteristics, the performance and safety standard of straight-bladed VAWT have not been full developed. The objective of this study is to investigate the effect of rotor aspect ratio and solidity on the power performance in three-dimensional analysis by panel method. The panel method is based on the assumption of an incompressible and potential flow coupled with a free vortex wake. First of all, the fluctuations of power coefficient and the circulation amount distribution of the bound vortex are discussed at the fixed solidity of σ = 0.064 during rotation. Then, the fluctuations of power coefficient and the circulation amount ratio are also investigated in the spanwise direction of the blade. It can be observed from the results that the peak of power coefficient increases with the increase of the ratio of the diameter and blade span length H/D at the fixed solidity. However, the optimum tip speed ratio was expected to be increased with the increase of H/D. Moreover, in the case of the fixed rotor aspect ratio of H/c = 6, the power coefficient depends on the rotor aspect ratio, rather than the ratio of the diameter and blade span length. Compared with the H/D = 1.2, the circulation amount ratio of H/D = 0.9 indicates a large negative value in the blade center position.
%D 2017
%= 2018-08-31
%G
%8 2017-02-15
%V v. 121
%P pp. 9-9
%R 10.1016/j.energy.2016.12.112