PubAg

Main content area

Biochar and enhanced phosphate capture: Mapping mechanisms to functional properties

Author:
Shepherd, Jessica G., Joseph, Stephen, Sohi, Saran P., Heal, Kate V.
Source:
Chemosphere 2017 v.179 pp. 57-74
ISSN:
0045-6535
Subject:
X-ray diffraction, X-ray photoelectron spectroscopy, aluminum, biochar, calcium, economic valuation, energy-dispersive X-ray analysis, feedstocks, functional properties, iron, minerals, oxidation, pellets, phosphates, phosphorus, phosphorus fertilizers, pyrolysis, recycling, scanning electron microscopy, sewage sludge, silicon, temperature, wastewater
Abstract:
A multi-technique analysis was performed on a range of biochar materials derived from secondary organic resources and aimed at sustainable recovery and re-use of wastewater phosphorus (P). Our purpose was to identify mechanisms of P capture in biochar and thereby inform its future optimisation as a sustainable P fertiliser. The biochar feedstock comprised pellets of anaerobically digested sewage sludge (PAD) or pellets of the same blended in the ratio 9:1 with ochre sourced from minewater treatment (POCAD), components which have limited alternative economic value. In the present study the feedstocks were pyrolysed at two highest treatment temperatures of 450 and 550 °C. Each of the resulting biochars were repeatedly exposed to a 20 mg l⁻¹ PO4-P solution, to produce a parallel set of P-exposed biochars. Biochar exterior and/or interior surfaces were quantitatively characterised using laser-ablation (LA)-ICP-MS, X-ray diffraction, X-ray photo-electron spectroscopy (XPS) and scanning electron microscopy coupled with energy dispersive X-ray. The results highlighted the general importance of Fe minerals in P capture. XPS analysis of POCAD550 indicated lower oxidation state Fe2p3 bonding compared to POCAD450, and LA-ICP-MS indicated stronger covariation of Fe and S, even after P exposure. This suggests that low-solubility Fe/S compounds are formed during pyrolysis, are affected by process parameters and impact on P capture. Other data suggested capture roles for aluminium, calcium and silicon. Overall, our analyses suggest that a range of mechanisms for P capture are concurrently active in biochar. We highlighted the potential to manipulate these through choice of form and composition of feedstock as well as pyrolysis processing, so that biochar may be increasingly tailored towards specific functionality.
Agid:
5637623