Jump to Main Content
Second stage lint cleaning system total particulate emission factors and rates for cotton gins: Method 17
- Michael D. Buser, Derek P. Whitelock, J. Clif Boykin, Gregory A. Holt
- Journal of cotton science 2015 v.19 no.1 pp. 82-91
- cleaning, cotton gin, cotton ginning, emissions factor, lint cotton, particulate emissions, pollution control, processing stages
- This report is part of a project to characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was focused on Environmental Protection Agency (EPA) total particulate emission factors. There is no total particulate emission factor published for 2nd stage lint cleaning systems in the 1996 EPA AP-42. The current AP-42 factor represents 1st and 2nd stage lint cleaning systems combined. The objective of this study was to collect total particulate emission factor data for 2nd stage lint cleaning systems from cotton gins located in regions across the cotton belt using EPA-approved stack sampling methodology. The project plan included sampling seven cotton gins. Key factors for selecting specific cotton gins included: 1) facility location, 2) production capacity, 3) processing systems, and 4) abatement technologies. Four gins with 2nd stage lint cleaning system exhausts that were not combined with 1st stage lint cleaning system exhausts were sampled. The average production rate during testing for the four gins was 29.0 bales/h. The average 2nd stage lint cleaning system total particulate emission factor based on four tests (11 total test runs) was 0.023 kg/227-kg bale (0.050 lb/500-lb bale). The 2nd stage lint cleaning system test average emission rates ranged from 0.22 to 1.50 kg/h (0.49-3.31 lb/h).