%0 Journal Article
%9 Article
%W National Agricultural Library
%~ PubAg
%B Renewable energy
%T A fundamental coupling methodology for modeling near-field and far-field wave effects of floating structures and wave energy devices
%A Stratigaki, Vasiliki
%A Troch, Peter
%A Forehand, David
%V 2019 v.143
%K absorption
%K cost effectiveness
%K energy conversion
%K equations
%K farms
%K mathematical models
%K prediction
%K shorelines
%K water power
%M 6455968
%X This research focuses on the numerical modelling of wave fields around (oscillating) structures such as wave energy converters (WECs), to study both near and far field WEC effects. As a result of the interaction between oscillating WECs and the incident wave field, additional wave fields are generated: the radiated and the diffracted wave field around each WEC. These additional wave fields, together with the incident wave field, make up the perturbed wave field. Several numerical methods are employed to analyse these wave fields around WECs. For example, for investigating wave-structure (wave-WEC) interactions, wave energy absorption and near field effects, the commonly used and most suitable models are based on Boundary Element Methods for solving the potential flow formulation, or models based on the Navier-Stokes equations. These models are here referred to as ‘wave-structure interaction solvers’. On the other hand, for investigating far field effects of WEC farms in large areas, wave propagation models are most suitable and commonly employed. However, all these models suffer from a common problem; they cannot be used to model simultaneously both near and far field effects due to limitations.In this paper, a generic coupling methodology is presented, developed to combine the advantages of the above two approaches; (a) the approach of wave-structure interaction solvers, which are used to investigate near field effects because they can more correctly model wave energy absorption and the resulting wave fields induced by oscillating WECs or WEC farms. These solvers suffer from high computational cost and thus are mainly used for limited: (i) areas around WECs; (ii) number of WECs, and (b) the approach of wave propagation models, which are used for predicting far field effects and which can model the effect of WEC farms on the wave field and the shoreline in a cost-effective manner, but usually cannot deliver high-fidelity results on wave energy absorption by the WECs.In addition, a novel wave generation technique is presented, for generating the perturbed wave field induced by an oscillating WEC, in a wave propagation model. The results obtained from the proposed coupling methodology and wave generation technique along a circle are validated and show very good agreement. Finally, the benefits of the proposed coupling methodology to model floating bodies in a phase resolving wave propagation model are discussed.
%D 2019
%= 2019-09-30
%G
%8 2019-12
%V v. 143
%P pp. 1608-1627
%R 10.1016/j.renene.2019.05.046