PubAg

Main content area

A Review of Computational Models for the Flow of Milled Biomass Part II: Continuum-Mechanics Models

Author:
Jin, Wencheng, Stickel, Jonathan J., Xia, Yidong, Klinger, Jordan
Source:
ACS sustainable chemistry & engineering 2020 v.8 no.16 pp. 6157-6172
ISSN:
2168-0485
Subject:
bioinformatics, biomass, equations, finite element analysis, lignocellulose, materials handling, models
Abstract:
The design of efficient material-handling systems for milled lignocellulosic biomass is challenging due to their complex particle morphologies and frictional interactions. Computational modeling, including the discrete element method (DEM) and continuum-based finite-element/volume methods, may offer scientific insight and predictive capabilities for the flow of milled biomass in hoppers and feeders. This article (Part II) presents a review of current state-of-the-art continuum models for the flow of milled biomass, whereas DEM models are reviewed in a companion article (Part I). Advances of numerical methods to solve the global governing equations are discussed first, followed by a comprehensive review of constitutive models for granular materials, including Drucker–Prager, hypoplastic, Cambridge-type, inertial-rheology, and nonlocal granular fluidity models. Specifically, we provide in-depth discussion on the suitability of those models for milled lignocellulosic biomass materials in terms of nonlinear elasticity, dependence of flow strength on pressure, density and shear rate, and compaction (dilation) associated with hardening (softening). Our study shows that, despite the recent advances in continuum granular flow modeling, the most suitable constitutive models still need further development to account for material parametrization, multiflow regimes, and multiscale behavior before they can be reliably used to optimize the design and operation of biomass handling systems.
Agid:
6911477