<oai_dc:dc xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd"><dc:title>Structural Changes in French VF Treatment Wetland Porous Media during the Rest Period: An Ex Situ Study Using X-ray Tomography</dc:title><dc:creator>Martinez-Carvajal, German  Dario</dc:creator><dc:creator>Oxarango, Laurent</dc:creator><dc:creator>Adrien, Jérôme</dc:creator><dc:creator>Molle, Pascal</dc:creator><dc:creator>Forquet, Nicolas</dc:creator><dc:source>Water 2021 v.13 no.3</dc:source><dc:subject>X-radiation</dc:subject><dc:subject>biosolids</dc:subject><dc:subject>computed tomography</dc:subject><dc:subject>gravel</dc:subject><dc:subject>surface area</dc:subject><dc:subject>water</dc:subject><dc:subject>wetlands</dc:subject><dc:identifier>7264474</dc:identifier><dc:description>Clogging constitutes a major operational issue for treatment wetlands. The rest period is a key feature of French Vertical Flow (VF) treatment wetlands and serves to mitigate clogging. An ex-situ drying experiment was performed to mimic the rest period and record structural changes in the porous media using X-ray Computed Tomography (CT). Samples containing the deposit and gravel layers of a first stage French VF treatment wetland were extracted and left to dry in a control environment. Based on CT scans, three phases were identified (voids, biosolids, and gravels). The impact of the rest period was assessed by means of different pore-scale variables. Ultimately, the volume of biosolids had reduced to 58% of its initial value, the deposit layer thickness dropped to 68% of its initial value, and the void/biosolid specific surface area ratio increased from a minimum value of 1.1 to a maximum of 4.2. Cracks greater than 3 mm developed at the uppermost part of the deposit layer, while, in the gravel layer, the rise in void volume corresponds to pores smaller than 2 mm in diameter. Lastly, the air-filled microporosity is estimated to have increased by 0.11 v/v.</dc:description><dc:date>2021-02-02</dc:date><dc:type>article</dc:type></oai_dc:dc>